Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.     

粉煤灰多孔陶粒在水处理中的应用研究

研究采用电厂的粉煤灰为主要原料制备多孔陶粒,分别将其用作水处理中的微生物载体和吸附剂。挂膜结果表明:COD、氨氮这两项指标的出水基本稳定,去除率高。用多孔陶粒作吸附剂处理含铬废水时,等温吸附实验表明,多孔陶粒吸附水中的铬的等温方程基本符合Langmiur等温方程式,在pH值为酸性时对铬的去除率较高。用HCl和NaOH溶液再生多孔陶粒,酸的效果更好。     

低渗透介质中轻非水相流体迁移转化规律

本文利用COMSOL软件建立轻非水相流体（LNAPL）纵向迁移转化模型,采用有限单元法进行求解,预测污染物分布规律,并利用局部分析法进行参数敏感性分析.结果表明,大部分LNAPL会在水面以上聚集形成高的质量分布峰值区域,少部分克服毛细压力向下迁移,在自由相迁移范围内,其溶解相浓度达到或接近饱和溶解度;当顶部污染源消失后,降水会使最大饱和度和浓度出现的深度逐渐下移;多孔介质中的低渗透镜体会使污染物垂向入渗受阻,在其表面聚积形成污染池;渗透系数是控制LNAPL纵向迁移速度及饱和度分布的关键参数.     

Analytical solutions of three-dimensional contaminant transport in uniform flow field in porous media: A library

The purpose of this study is to present a library of analytical solutions for the three-dimensional contaminant transport in uniform flow field in porous media with the first-order decay, linear sorption, and zero-order production. The library is constructed using Green’s function method (GFM) in combination with available solutions. The library covers a wide range of solutions for various conditions. The aquifer can be vertically finite, semi-infinitive or infinitive, and laterally semi-infinitive or infinitive. The geometry of the sources can be of point, line, plane or volumetric body; and the source release can be continuous, instantaneous, or by following a given function over time. Dimensionless forms of the solutions are also proposed. A computer code FlowCAS is developed to calculate the solutions. Calculated results demonstrate the correctness of the presented solutions. The library is widely applicable to solve contaminant transport problems of one- or multiple- dimensions in uniform flow fields.     

双温点立式炉烧结的PTCR

本文研究了立式炉生产的程控交换机过电流保护用PTCR元件的几项关键的环境适应性参数,并与箱式炉烧结试样做了对比。结果表明用该设备烧结的PTCR元件,阻温特性重复性好、高温存放后阻值变化小、耐电流和雷击冲击性稳定,安全可靠、寿命长、有良好的环境适应性。     

生物陶粒处理深圳水库水的试验研究

利用生物陶粒对深圳水库水进行了生物预处理现场试验研究,试验结果表明,生物陶粒能有效地降低水中的ＮＯ２－Ｎ、ＮＨ３－Ｎ、ＯＣ、浊度、色度、Ｍｎ和藻类,在工作滤速为４ｍ／ｈ,气水比为１：１的条件下平均去除率分别为９０．８％,８４％、２１．４％６２％、４７％、８９％和６８％,是解决水源水微污染问题有效的预单元工艺。     

无机超滤技术和生化处理技术在宝钢冷轧含油废水处理中的应用

冷轧废水处理是轧钢工艺中的难点之一。宝钢 2 0 30冷轧废水处理改造工程 ,首次将生化处理技术引入到冷轧含油废水处理工艺 ,并在工程中采用了无机陶瓷超滤技术 ,从而实现了冷轧废水处理的国产化及国内技术总成     

燃煤陶瓷隧道窑的烟气净化技术

主要论述了某陶瓷厂新建成的燃煤隧道窑的除尘脱硫设施。采用湿式除尘脱硫与陶瓷微孔过滤除尘技术相结合 ,同时通过在循环水中加生石灰的方法进行脱硫 ,净化后的烟气通过 35米烟囱排放。经当地环保部门监测 ,净化后的烟气完全达标排放。该套设备除尘效率不低于 94.94% ,平均达到 95 .87% ;脱硫效率不低于 56 .2 5% ,平均达到 63 .69%     

Neutron activation analysis of ceramic tiles and its component and radon exhalation rate

IntroductionCeramic,consistofearthymaterialslikeclaykaolin ,limestoneandsandglass .Ceramicmaterialsarenonmetalic ,inorganiccompoundsprimaryoxides ,alsocarbides ,nitridesandsilicides .Twotypesofbondingmechanismsoccurinceramicmaterial ,ionicandcovalent.Theo…     

蜂窝夹层结构及其在直升机噪声控制上的应用

介绍了传统蜂窝夹层结构,它是由蜂窝芯材耦合面板/薄膜组合而成,具有优异的降噪特性。为进一步提升蜂窝夹层结构的降噪性能,结合多孔吸声原理及“吸/隔声结构功能一体化”概念,将多孔吸声材料填充至蜂窝芯中,形成了基于多孔吸声的蜂窝夹层结构,但中、低频降噪性能较差。结合微穿孔板、亥姆霍兹共振理论,开发了基于共振吸声的单自由度蜂窝夹层结构,由蜂窝芯材耦合穿孔面板/薄膜组合而成,提升了中、低频降噪特性,但是依旧存在降噪频带过窄的问题,只能在某段特定频率范围内表现出良好的降噪特性。为此,研发了基于共振吸声的多自由度蜂窝夹层结构,利用各层穿孔面板/薄膜和蜂窝结构特性,实现了不同频率噪声控制。最后总结了蜂窝夹层结构在国内外直升机被动噪声控制上的应用情况,展望了新型蜂窝夹层结构的发展趋势。